SM24TAT4XB

Managed Gigabit Ethernet PoE+ Switch
(24) 10/100/1000Base-T Ports + (4) 1G/10GBase-X SFP+ Ports

This switch is a high performance managed PoE+ switch with (24) 10/100/1000 copper ports and (4) dual speed 1G/10G SFP+ slots.

NDAA CompliantTAA Compliant

SM24TAT4XB Overview

Features

  • Supports Jumbo Frame up to 10240 bytes
  • Authentication – RADIUS IEEE 802.1X, TACACS+
  • Security – Support SSH/SSL
  • Port based or tagged (IEEE 802.1Q) VLAN, MAC based VLAN, Management VLAN and Private VLAN Edge
  • DHCP Server, Client, Relay
  • IEEE 1588v2 PTP (TC)
  • ACLs Support for up to 512 entries, drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, DSCP/IP precedence, TCP/IP source and destination ports, IEEE 802.1p priority, Ethernet Type / IGMP packets, TCP flag
  • LLDP (Link Layer Discovery Protocol)
  • IEEE 802.3az Energy Efficiency
  • Web Management, SNMP V1/V2c/V3, Telnet, CLI
  • Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP). Supports up to 26 groups with (4) ports per group.
  • Supports IGMP Snooping V1/V2/V3, up to 1024 multicast groups, GVRP, IGMP Proxy, IGMP Querier
  • MLD snooping V1/V2: deliver IPv6 multicast packages only to the required receivers
  • Supports 8 hardware queues, Strict priority and WRR. Queue assignment based on DSCP and IEEE 802.1p CoS; IPv4/IPv6 precedence/ Type of Service / DiffServ / classification and remarking ACLs; rate limiting, ingress policer, egress shaping and rate control
  • IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
  • Firmware Update, configure backup/restore through web GUI and TFTP
  • Supports IPv4/IPv6 Layer 3 static routing
  • ITU-T G.8031, G8032, loop detection

 

PoE Features

  • Compliant with IEEE 802.3at PoE+
  • Compliant with IEEE 802.3af PoE
  • IEEE 802.1AB LLDP-MED Configuration
  • Auto Power Reset
  • DHCP per port
  • Always on PoE

 

Device Management System (DMS) Features

  • Graphical Monitoring – Topology view, Floor view, Map view
  • Traffic Monitoring
  • Troubleshooting – Network diagnostic, protection mechanism, performance and link management

Videos

Last Updated: 04/15/2022

SM24TAT4XB Tech Specs

    Standards

    • IEEE 802.3
    • IEEE 802.3u
    • IEEE 802.3z
    • IEEE 802.3x
    • IEEE 802.3ad
    • IEEE 802.1D
    • IEEE 802.1w
    • IEEE 802.1s
    • IEEE 802.1Q
    • IEEE 802.1p
    • IEEE 802.1ad
    • IEEE 802.1AB
    • IEEE 802.3af
    • IEEE 802.3at
    • IEEE 802.3az
    • IEEE 802.1X

    Connectors

    • (1) RS-232 Serial port
    • (24) 10/100/1000 RJ-45 ports
    • (4) 1G/10G SFP+ slots

    Protocols

    • CSMA/CD

    Technology

    • Store-and-forward switching architecture

    MAC Address

    • 32K MAC address table

    Backplane

    • 128 Gbps

    Dimensions

    • Width: 17.4” [442 mm]
    • Depth: 8.31” [211 mm]
    • Height: 1.73” [44 mm]

    Power Consumption

    • 44 Watts (max without PoE)
    • 450 Watts (full load with PoE)

    Power Input

    • Internal Power: 100 – 240VAC

    Power-over-Ethernet

    • Max PoE budget 370 Watts
    • 30 Watts for (12) ports simultaneously
    • 15.4 Watts for (24) ports simultaneously

    Environment

    • Operating: 0°C to 50°C
    • Humidity: 5% to 90% (non-condensing)

    Weight

    • 8.38 lbs. [3.8 kg]

    Certifications

    • Safety: UL Listed, IEC62368/EN62368
    • Emissions: FCC Class A, CE Mark

    Warranty

    SM24TAT4XB Downloads

    Additional Product Information

    Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

    Certificates

    Don’t see the certificate you need? Contact us to explore options and timelines for new certificates.

    CERTIFICATION, CE/UKCA DOC, SM24TAT4XB
    DofC
    374 KB
    View
    Visio Stencils

    Plan your network with Microsoft Visio Stencils. You must log in or create a MyLantronix account to access Visio Stencils.

    Firmware Downloads

    Keep your products up to date by downloading the latest firmware. You must log in or create a MyLantronix account to download firmware. 

    Lantronix Part # Name Description Order Now
    Sorry, no parts were found that match that search query.
    Lantronix Part #
    SM24TAT4XB
    Name
    SM24TAT4XB

    (24) 10/100/1000Base-T ports + (4) 1G/10GBase-X SFP+ slots (empty)

    Contact Us
    Compatible Accessories
    Lantronix Part #
    SFP Modules
    Name
    SFP Modules
    Contact Us
    Lantronix Part #
    BRSM24-01
    Name
    BRSM24-01

    Wall Mount Bracket for SM24TAT4XB

    Contact Us

    Complete the Solution

    Percepxion for Networking
    Centralized management software for Console Servers and Network Switches
    LEVEL, Technical Services
    Our dedicated technical experts are here to assist with your unique IoT and IT solutions.
    scroll to top

    By continuing to use the site, you agree to the use of cookies. more information

    The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

    Close